top of page
12.jpg

HOW TO APPLY

Line_edited.png

 

  • COTTONS – SET PRESS TO 160 DEGREES - MEDIUM PRESSURE

 

  • ​POLYESTER – SET PRESS TO 135 DEGREES LIGHT TO MEDIUM PRESSURE

 

  • ​PLACE TRANSFER ON THE GARMENT AND COVER WITH PARCHMENT PAPER

 

  • ​PRESS FOR 12-15 SECONDS MAXIMUM

 

  • ​OUR FILM IS WARM PEEL RELEASE - SO PLEASE WAIT A FEW SECONDS AND PEEL AWAY - IF TRANSFER IS LIFTING PLEASE ALLOW TO COOL LONGER OR USE A DAMP CLOTH TO QUICKEN THIS PROCESS

 

  • ​COVER WITH PARCHMENT PAPER AND RE-PRESS FOR 3-5 SECONDS.

 

  • PLEASE WAIT 24 HOURS BEFORE WASHING OR STRETCHING​

Capture.PNG

TROUBLE SHOOTING

Line_edited.png

AS A RULE DTF TRANSFER VERY RARELY HAVE APPLICATION ISSUES. IF THE TRANSFER IS LIFTING TRY INCREASING THE HEAT PRESS BY 10 DEGREES AND INCREASE THE PRESSURE THEN ALLOW TO COOL LONGER OR USE A DAMP CLOTH TO QUICKEN THIS PROCESS

ANY QUERIES OR ISSUES PLEASE CALL 0161 791 5299 OR E-mail transfers@alldtf.co.uk AND WE WILL HELP YOU.  

6bfeb4376c5ed87f3a46ab2d55565d35.jpg

ARTWORK

Line_edited.png

  • WE CAN ACCEPT ARTWORK IN OTHER FORMATS... 

  • THESE INCLUDE EPS, AI, PDF, PNG, PSD, JPG, GIF, CDR, SVG.

  • PLEASE PROVIDE ARTWORK WITH A TRANSPARENT BACKGROUND IN THE HIGHEST POSSIBLE RESOLUTION 300dpi. FOR BEST RESULTS PLEASE PROVIDE ARTWORK IN VECTOR FORMAT!

  • PLEASE MAKE SURE YOU PROVIDE READY TO PRINT ARTWORK AT CORRECT DIMENSIONS WITHIN THE 56CM X 100CM PRINT AREA

  • PLEASE CHECK YOUR ARTWORK FOR ERRORS - WE ADVISE YOU CREATE A BLOCK COLOUR BACKGROUND TO HIGHLIGHT ANY POTENTIAL ERRORS - MAKE SURE TO DELETE IT ONCE CHECKED AS WE REQUIRE ARTWORK WITH A TRANSPARENT BACKGROUND

  • WE DO NOT CHECK FILES FOR DESIGN ERRORS, IT IS YOUR RESPONSIBILITY TO PROVIDE READY TO PRINT ARTWORK

  • DTF TRANSFERS WILL NOT BE RE-PRINTED DUE TO INCORRECT ARTWORK SUPPLIED!

JPG.png
PDF.png
PNG.png
GIF.png
SVG.png
EPU.png
12.jpg

WASHING INSTRUCTIONS

Line_edited.png

  • PLEASE WASH DTF TRANSFERS AT MAXIMUM OF 30-40 DEGREES.

​

  • DO NOT TUMBLE DRY OR IRON DIRECTLY ONTO THE TRANSFER.

​

  • WHEN WASHING GARMENTS WE RECOMMEND YOU TURN YOUR GARMENT INSIDE OUT. THIS WILL THEN PROTECT TRANSFER FROM FRICTION OR ABRASION WITH FABRICS DURING YOUR WASHING CYCLE.

​

  • PLEASE DO NOT USE ANY FABRIC SOFTENERS OR CHEMICALS OR IF REQUIRED USE ONLY A SMALL AMOUNT.

​

  • WHEN AIR DRYING YOUR GARMENTS PLEASE KEEP YOUR GARMENTS INSIDE OUT. DIRECT SUNLIGHT CAN AFFECT THE VIBRANCY OF THE TRANSFER DUE TO PHOTO DEGRADATION.

​

257114-800x515r1-how-properly-do-laundry.jpg
bottom of page